SYNOL VSG GREASE

SYNOL VSG Grease is Silicone High Vacuum (upto 10-⁹ torr) grease. It is also suitable as chemical resistant stopcock grease and lubricant for synthetic rubber

O-rings, seals and gaskets.  It is also an excellent mold release agent for reactive polymers such as epoxy & polyurethane compounds and Engineering plastics based on Styrene (ABS, HIPS), Nylons and Polyesters, etc.  It is a water repellent airtight sealant for air control valves and pneumatic systems.  It is also a heat stable (upto 250°C) dielectric water repellent sealant suitable for electrical systems. It also has very good heat transfer property for conducting the heat away from hot zones.

CHARACTERISTIC                             TYPICAL VALUES

1. Colour   …        Light grey, Translucent.
2. Specific gravity   …        1.01
3. Penetration   …        200-250
4. Drop Point                                 …        None
5. Dielectric strength at

50 mil gap               …      300 Volts/mil

6. Evaporation after 30 hrs.

at 200°C                                     …       2% maximum

7. Bleed after 30 hrs. at 200°C      …     8% maximum

8. Service Temp.Range             …       -40°C to 250°C.

AREA OF APPLICATIONS:  SYNOL VSG Grease is used as:

• Sealant and lubricant for automatic control valves, flow meter bearings, pump packings, on floating telephone batteries, in valves of water softner, on Fire Extinguishers etc.
• Lubricant for synthetic rubber O-rings, seals and gaskets.
• Mould release agent for epoxy, polystyrene, polyvinylchloride, polyester resins and other plastics.

Packing:    50-gm.jar 100-gm Jar, 1-kg. Pack and 4-kg. Pack.

Our Prestigious Clients