Application :
It is normally used for internal cleaning and flushing of gear boxes of equipments & components, which are subsequently lubricated with fresh lubricating oils, especially when synthetic oil is charged afresh.

Benefits :
Removes carbon and varnish deposits
Cleans gears, bearings, chains, pipelines, tanks and machinery components which are lubricated by oil circulation 

Instruction for Use :
Mix GEAR FLUSHER as per the above dosage, in the gear box /tank containing used oil. 
Run the gear box / circulation system for about 1 hour at idle / low speed conditions and then stop the gear box and drain the used oil completely

Dosage :
For flushing purpose, we recommend 1 litre for every 10 litres of used oil in the gear box or sump (tank)

Packing : 25-Litre drum and 200-Litre drum.

Shelf Life : 2 years.